Maxtower with MSC3 stage kit
Powered speaker, handheld microphone with cable and microphone stand

Original price was: $260.00.Current price is: $119.99.

  • Active 250 Watt Class D Amplifier
  • 3-Inch Line Array Piston Drivers x8
  • Dual Channel Mixer with XLR-1/4" Inputs
  • 180° Dispersion
2 instock
PAS-250+MSC3

2 in stock

Description

The Nady Max Tower PAS-250 Portable PA System is a powerful, self-amplified PA speaker featuring 250 watts of power (RMS) and a total of eight 3-inch (7.62cm) line-array piston drivers for full range sound during speech and performance applications. The Max Tower PAS-250 mounts onto a tripod stand (included), and features a 2-Channel mixer with XLR-1/4″ phone combi-connections

Easily connect line level devices, condenser and dynamic microphones to the system. The PAS-250 provides phantom power to condenser microphones, features a 10dB attenuation switch to avoid distortion from hot signals, and a convenient mute button for avoiding noise surges during connection changes.

The speaker’s line array configuration provides excellent feedback rejection and allows the speaker to be mounted behind the talent, making it a useful monitor and FOH speaker all at once. The Nady Max Tower PAS-250 Portable PA System delivers sound quality and features well suited for houses-of-worship, conference and lecture halls, small live performance venues, auditoriums, town halls and more.

  • Self contained PA with built-in 250W RMS output power amp delivers exceptional full-range audio quality and enhanced coverage for a variety of venues
  • Class D operation for higher efficiency and cool operation
  • Mixer section features dual XLR-1/4″ combo inputs with selectable 48V phantom power with LED indicator
  • Each input is equipped with independent controls (gain, EQ, and reverb) plus a 10dB attenuation select switch for hot input signals; master volume control; convenient mute button for eliminating noise when swapping or adjusting mic or instrument inputs; mute on LED indicator; balanced XLR output with independent, pre-effect level control for connection to a powered subwoofer or audio mixer
  • Eight 3″ line-array high-excursion speakers, provide wider dispersion and more sonic penetration than standard cabinet speakers. Excellent feedback rejection allows behind-performer placement so that the Max Tower can serve as both an FOH and a monitor speaker at the same time, allowing the performer to hear exactly what the audience hears
  • Max Tower is the ultimate in portability, easy to transport and set up. A tripod speaker stand and nylon carrying bag are included.
  • Roadworthy, constructed of durable, yet lightweight, polymer composite material
  • Balanced XLR output with independent line level control to chain additional Max Towers units, or other devices

 

The MSC3 Stage Microphone Kit is an all-in-one solution for singers/performers featuring a high-performance dynamic microphone with clip and tripod stand.

The microphone’s advanced high-output neodymium cartridge provides  superior professional performance with rich, powerful, full-frequency sound with maximum clarity and definition, even in noisy environments.

Its unidirectional cardioid pattern helps reduce feedback and the special-design internal cartridge mount for lowest handling noise and quiet performance can withstand the highest sound pressure levels without overload or distortion.

The kit includes a 20 foot XLR to 1/4″ cable, a microphone clip and a sturdy metal tripod adjustable up to 6′ 4″.

The MSC3 can be used with most mixers and PA’s. It can be connected to a high impedance 1/4″ microphone input using the included cable, or to a regular XLR input using a standard microphone cable (not included). No phantom power required.

The MSC3 Stage Microphone Kit is an all-in-one solution for singers/performers featuring a high-performance dynamic microphone with clip and tripod stand.

The microphone’s advanced high-output neodymium cartridge provides  superior professional performance with rich, powerful, full-frequency sound with maximum clarity and definition, even in noisy environments.

Its unidirectional cardioid pattern helps reduce feedback and the special-design internal cartridge mount for lowest handling noise and quiet performance can withstand the highest sound pressure levels without overload or distortion.

The kit includes a 20 foot XLR to 1/4″ cable, a microphone clip and a sturdy metal tripod adjustable up to 6′ 4″.

The MSC3 can be used with most mixers and PA’s. It can be connected to a high impedance 1/4″ microphone input using the included cable, or to a regular XLR input using a standard microphone cable (not included). No phantom power required.

Additional information

Weight 32 lbs

Specifications

Amplifier Power Rating  250 W RMS

 

Connectivity

Audio I/O   2 x Combo XLR-1/4″ Input

Phantom Power     +48 V

 

Physical

Dimensions  4 x 9 x 36″ / 10 x 22.86 x 91.44 cm

Weight      20 lb / 9.1 kg

 

Packaging Info

Package Weight: 32 lb

Box Dimensions (LxWxH)  38.25 x 16.25 x 6.25″

MSC3 Stage kit

Element: Moving coil dynamic neodymium
Polar pattern: Unidirectional cardioid
Frequency response: 50Hz ~ 15kHz (±3dB)
Sensitivity: -55dB (0dB = 1V/Pa)
Impedance: 600Ω
Maximum SPL (THD 1% @ 1kHz): 120dB
Connector: XLR balanced
Mic cable: 20’ (6m) 3-pin XLR to 1/4” TS
Dimensions: Length: 7” (180mm)  / Diameter: 2.1” (52mm)
Weight: 9.2 oz (260 g)
Material: Zinc alloy die-cast zinc  /  Ballscreen: Steel mesh