PM-200A Personal Active Stage Monitor
Hear yourself loud and clear in every stage situation

$209.99

  • Powerful internal 150W RMS amplifier and specially designed dual ferro-fluid 5” drivers
  • Balanced ¼” TRS and XLR input jacks, balanced ¼” line output jack, ¼” headphone output
  • Volume control, three-band equalizer, and clip indicator LED
  • Integrated low noise MOSFET outputs with thermal and short circuit protection
  • ¼” powered output jack can provide power and audio to a Nady PM-100 passive stage monitor (sold separately) or other passive speaker (4ohm min)
10+ instock
PM-200A

117 in stock

Description

The PM-200A Personal Active Stage Monitor is the perfect tool for monitoring audio on stage or in rehearsal so you’ll never have to scream for “More Monitors!” again. This 150W RMS active speaker can be coupled with a passive PM-100 monitor (sold separately) and is designed to reduce feedback while allowing vocals and instruments to stand out in the mix. The monitor is designed to reduce stage clutter and volume by putting the sound where you can most use it

Featuring a pair of 5″ ferro-fluid drivers that offer clear, powerful sound with high SPL levels, low distortion, and excellent feedback rejection. Simply input a line level feed from the main or monitor mixer and adjust the 3 band EQ to your personal liking. You can also input your instrument/vocal signal directly before outputting to the main PA to hear yourself solo. You’ll hear yourself loud and clear with the PM-200A by your side.

Flexible connections:

  • INPUTS: XLR Mic and 1/4″ line inputs.
  • OUTPUTS: Powered speaker / headphones / Line

3-band equalizer for perfectly tailored sound Powerful and compact: Up to 150W and only 10 lbs. Dual ferro-fluid drivers offer clear, powerful sound with high SPL levels, low distortion, and excellent feedback rejection Includes metal adapter for mounting on a mic stand

Additional information

Weight 11.2 lbs
Dimensions 13 × 9 × 8 in

Specifications

Mic Input: Balanced XLR
Line Input: Balanced/Unbalanced ¼” TRS
Line Output: Balanced/Unbalanced ¼” TRS
Headphone Output: Stereo ¼” TRS
Power Amplifier Output: 2x 50W RMS (total 100W RMS @ 8Ω)
2x 75W RMS (total 150W RMS @ 4Ω)
Frequency Response: 30Hz – 20kHz
THD: 0.003%
THD+N: 0.03%
Noise Floor: -85dBu
Amplifier Protection: Clipping LED’s
Overcurrent Protection Fuse
Thermal Runaway and Short Circuit Protection
Driver Type: Full-Range 5” Ferro-Fluid
Driver Impedance: 8Ω
Voice Coil Diameter: 1”
Fuse Requirements: 5x20mm Glass Tube 3.15A 250V
Weight: 10 lbs
Dimensions: 11.1” x 7” x 6.1” (28 x 18 x 15.5cm)
Power Requirements: Selectable 115VAC/60Hz or 230VAC/50Hz

Box Contents

1 x PM-200A

1 x IEC cable

1 x Stand adapter

1 x Manual

1 x Registration card