Nady PEM-1000 Wireless In-Ear Monitoring System
With 100 Selectable UHF Channels And Auto Scan

$329.99

  • Receiver has AUTO-SCAN for an open channel and IR SYNC to system transmitter
  • Handy Mute Button for muting audio if desired during use
  • Externally powered by AC-DC power adapter
  • IR (Infrared) synchronization both ways interface between receiver and transmitter

Only 1 left in stock

SKU: PEM-1000-B2 Categories: ,

Description

This PEM-1000 offers all of the advantages of wireless in-ear monitoring-mobility, more focused audio, freedom from feedback, and elimination of transport issues associated with conventional floor monitors-as well as the long-term health benefits of safe listening levels. For the first time, a wireless in-ear monitor system combines state-of-the-art advanced frequency synthesized UHF technology, high-end performance, ease of use, and unprecedented affordability.

The PEM-1000 offers a choice of 100 user selectable UHF channels for the transmitter and receiver(s), as well as stereo (MPX system) or mono mode transmission. This system is indispensable for live-stage music performance, and is loaded with features previously found only in units costing several times more

Nady PEM 1000 Features

  • System Features
  • Available on selected frequency bands within the UHF band for interference-free, long-range performance (up to 8 systems can be operated simultaneously, depending on country and frequency band)
  • System consists of PEM-1000T transmitter and one bodypack PEM1000R receiver, both of which offer 100 channels user select-ability. Any number of additional receivers can also be operated with the same transmitter if they are all set to the same channel
  • AUTO-SCAN on receiver unit for easily locating clear channels or manual chose Group/Channel on transmitter
  • IR (Infrared) synchronization both ways interface between receiver and transmitter
  • User-friendly menu operation with more control options shown in LCD display
  • Proprietary companding circuitry for wide Dynamic Range and clear, natural sound
  • Operating Range: Up to 500 feet typical (depending on site conditions)
  • Rugged, foam-padded traveling case provides easy, safe transport and storage
  • PEM-1000T Transmitter Features
  • Rugged, all metal half-rack that can be rack mounted singly or side-by-side with optional rack kits
  • Front panel features stereo headphone monitor output jack and volume control, select button for choosing one of 100 UHF channels, Left/Right 5-segment audio input level displays, LCD channel display, and IR SYNC to system receivers
  • Back panel provides BNC jack for the detachable antenna, a combo 1/4″ TRS unbalanced, and balanced XLR jacks for Left and Right Line inputs, Left and Right 1/4″ TRS unbalanced loop outputs
  • Externally powered by AC-DC power adapter
  • PEM-1000R Receiver Features
  • Portable bodypack receiver features a power switch switchable with built-in volume output level control, select button for choosing one of 100 UHF channels, LCD channel display, stereo/mono, Signal/ Low Battery LED indicator
  • Receiver has AUTO-SCAN for an open channel and IR SYNC to system transmitter
  • Handy Mute Button for muting audio if desired during use
  • Operates up to 8 hours (depending on volume) on 2×1.5V AA alkaline batteries
  • Each receiver is supplied with a pair of miniature, lightweight (yet powerful) in-ear speakers with soft rubber mounts, designed for “custom” form-fitted comfort and optimum acoustic transfer and isolation
  • Rear clip can be rotated 180 Degree for attaching receiver either vertically up or down position

 

Download Manual

SystemJump to...

Operating Frequency Range
Band 1 - 673 MHz to 685.375 MHz Band 2 - 583 MHz to 607.750 MHz
Modulation
Mono or stereo (MPX with pilot tone), FM: F3E +/- 25 KHz, nominal
Audio Frequency Response
50 - 15,000 Hz (-3dB)
T. H. D.
< 1%
Signal-to-Noise Ratio
> 80 dB, with proprietary companding noise reduction
Operating Range
Up to 500 feet typical (depending on site conditions)
 

PEM-1000T TransmitterJump to...

RF Output Power
100 mW (Hi) 10 mW (Lo) country dependent
Spurious Emission
> -55 dBc
Frequency Stability
+/- 100 PPM
Headphones Out Power
50 mW max. @ 16 - 32
Input impedance
750 (L/R Audio Line Inputs)
Nominal Input Level
0 dBm
Max. Input Levels
+4dB/+10dB Selectable
Controls
Power ON/OFF, Menu buttons; headphones monitor volume control
Connectors
1/4" stereo headphones monitor out, Combo 1/4" and XLR female type in, and 1/4" TS unbalanced loop out jacks, 1/12" barrel-type DC input jack; BNC antenna socket
Indicators
Power ON LED; Channel LCD and 5-segment L-R audio LED input displays
Antenna
1/4 wave rigid detachable, BNC mount
Power Requirement
External 12V/1000mA (110V-240V auto selection)
Dimensions
8.27 x 9.1 x 1.75" (210 x 231 x 45mm)
Weight
2.98 lb (1.35Kg)

PEM-1000R ReceiverJump to...

Maximum Audio Output Level
80 mW max, 5mW (Limiter ON) @ 16 - 32
RF Sensitivity
2.5uV (-100 dB/12 dB SINAD)
Squelch Threshold
< -90 dB
Spurious Rejection
> 55 dBc
Audio Output Connector
1/8" Stereo (Tip=left, Ring=Right, Sleeve=ground)
Controls
Volume/ON/OFF, IR window, STEREO/MONO, Limiter ON/OFF switches, LOCK, SYNC, SCAN buttons and MUTE button
Indicators
Low Battery LCD (5 Bars), Signal ON (RED LED)
Power Requirements
1.5Vx2 alkaline batteries
Current Drain
130 mA-260mA
Battery Life
Up to 8 hours, volume dependent
Antenna
External Flexible
Batteries
2AA
Dimensions
4.5 x 0.9 x 2.6" (115 x 23 x 66mm)
Weight
2.85 oz (80Kg)
California customers: Proposition 65 WARNING